Kyocera Mita KM-2530 Service Manual page 671

3DB
3. Remove 13 screws and take off the controller-box
cover.
4. Fit control ROM IC1 and control ROM IC2 to the
flash tool assembly.
5. Insert connector CN1 (the one furthest from the
LEDs) on the flash tool assembly into connector
YC5 on the fax control PCB.
1-6-2
Control ROM IC2
CN2
CN1
Fax control PCB
Controller-box cover
Screws
Figure 1-6-3
Control ROM IC1
Flash tool assembly
Figure 1-6-4
YC5
Flash tool assembly
Figure 1-6-5
CN1