Kyocera Mita KM-2530 Service Manual page 151

Maintenance
item No.
U990 Checking/clearing the time for the exposure lamp to light
Description
Displays, clears or changes the accumulated time for the exposure lamp to light.
Purpose
To check duration of use of the exposure lamp. Also to clear the accumulated time for the lamp after
replacement.
Method
Press the start key. The accumulated time of illumination for the exposure lamp is displayed in minutes.
Clearing
1. Press the reset key.
2. Press the start key. The accumulated time is cleared, and the screen for selecting a maintenance item No.
is displayed.
Setting
1. Enter a six-digit accumulated time using the numeric keys.
2. Press the start key. The time is set, and the screen for selecting a maintenance item No. is displayed.
Completion
To exit this maintenance item without changing the accumulated time, press the stop/clear key. The screen for
selecting a maintenance item No. is displayed.
U991 Checking/clearing the scanner count
Description
Displays or clears the scanner operation count.
Purpose
To check the status of use of the scanner.
Method
Press the start key. The screen for selecting an item is displayed.
Display
TOTAL SCAN COUNT
NT SCAN COUNT
Clearing
1. Select the item to be cleared.
2. Press the reset key.
3. Press the start key. The count is cleared. The screen for selecting a maintenance item No. is displayed.
Setting
1. Select the item to be changed.
2. Enter a six-digit count using the numeric key.
3. Press the start key. The value is set. The screen for selecting a maintenance item No. is displayed.
Completion
To exit this maintenance item without changing the current setting, press the stop/clear key. The screen for
selecting a maintenance item No. is displayed.
Description
Description
Counts of scanner operation
Counts of network scanner operation
2DF
1-4-54-1 1-4-55