Kyocera Mita KM-2530 Service Manual page 280

RCL
EM
RSW
ESW
FSSW
a: The leading edge of paper (front face) turns on the eject switch (ESW), and at the same time the eject motor (EM)
starts forward rotation.
b: 40 ms after passing of the trailing edge of paper turns off the eject switch (ESW), the eject motor (EM) turns off for 50
ms and then starts reverse rotation.
c: The leading edge of paper (reverse face) turns on the eject switch (ESW), and at the same time the eject motor (EM)
turns off for 50 ms and then starts forward rotation.
d: 518 ms after passing of the trailing edge of the paper turns off the eject switch (ESW), the eject motor (EM) turns off.
Secondary paper feed end
Fwd. rotation
40 ms
Timing chart 2-1-7 Eject and switchback sections operation
Rev. rotation
50 ms
50 ms
518 ms
2DF
Fwd. rotation
2-1-21