Kyocera Mita KM-2530 Service Manual page 614

3DB
Maintenance
item No.
U602 Setting factory defaults
Description
Initializes software switches other than that for machine data and the SRAM on the fax control PCB, according
to the destination and OEM.
Purpose
Used to initialize the fax control PCB to the factory default.
Method
1. Press the start key. Data initialization starts. To cancel data initialization, press the stop/clear key.
2. After data initialization, the entered destination and OEM codes are displayed, and the ROM version is
displayed two seconds later.
INI. SHIP DATA
COMPLETED 000 000
INI. SHIP DATA
COMPLETED V1.00
1-3-6
Description