Kyocera Mita KM-2530 Service Manual page 150

2DF
Maintenance
item No.
U937 Model name setting
Description
Sets the product name to be displayed on the printer status screen, etc. when installing a printer board
(optional).
Purpose
To set the name if initialization is performed.
Method
Press the start key. The screen for selecting an item is displayed.
Setting
1. Select the **30 or **31. The selected item is displayed in reverse.
Initial setting: **30
2. Press the start key. The setting is set, and the screen for selecting a maintenance item No. is displayed.
Completion
To exit this maintenance item without changing the current setting, press the stop/clear key. The screen for
selecting a maintenance item No. is displayed.
U960 Outputting the machine used circumstances list
Description
Outputs machine used circumstances list and clears the data.
Purpose
To check the machine operation situation. Also to clear the data.
Method
Press the start key.
Outputting the list
1. Select OUTPUT.
2. Press the start key to output the list.
Clearing
1. Select COUNT CLEAR.
2. Press the start key to clear the count.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
U968 Shading plate switching setting
Description
Adjusts the reference value for shading correction in accordance with the new or old type of shading plate.
Purpose
To set the value when the shading plate is replaced.
Method
Press the start key.
Setting
1. Set the preset value in accordance with the new or old type of shading plate.
New shading plate (part No.: 2BC12130): 1
Old shading plate (part No.: 35912200): 0
2. Press the start key. The setting is set, and the screen for selecting a maintenance item No. is displayed.
Completion
To exit this maintenance item without changing the current setting, press the stop/clear key. The screen for
selecting a maintenance item No. is displayed.
1-4-54
Description