Kyocera Mita KM-2530 Service Manual page 536

3CM
Maintenance
item No.
U614 Adjusting the DTMF output level
Description
Adjusts the DTMF output level of a push-button dial telephone.
Purpose
No change is necessary from the factory default.
Start
1. Press the start key. The screen for selecting an item is displayed.
2. Press the appropriate item.
The screen for the selected item appears.
Display
SGL LVL DTMF (H)
SGL LVL DTMF (L)
Setting
1. Change the setting using the numeric keys.
Setting
12
11
10
9
8
7
6
5
4
2. Press the start key. The value is set.
3. To return to the screen for selecting an item, press the stop/clear key.
Completion
Press the stop/clear key at the screen for selecting an item. The screen for selecting a maintenance item No. is
displayed.
1-3-22
Description
Adjusts the DTMF (high-frequency group) output level.
Adjusts the DTMF (low-frequency group) output level.
DTMF (high-/low-frequency group) output level
2.0 dBm
1.5 dBm
1.0 dBm
0.5 dBm
0 dBm
–0.5 dBm
–1.0 dBm
–1.5 dBm
–2.0 dBm
Description