Kyocera Mita KM-2530 Service Manual page 663

3DB
Code Contents
C0880 Fax control PCB program archive
problem*
• When power is turned on, the
compressed program in the Flash
ROM on the fax control PCB was not
successfully decompressed.
C0890 Fax control PCB CG font archive
problem*
• When power is turned on, the
compressed CG font in the Flash
ROM on the fax control PCB was not
successfully decompressed.
1-5-2
Causes Check procedures/corrective measures
Defective fax con- Replace the fax control PCB and check for
trol PCB. correct operation.
Defective fax con- Replace the fax control PCB and check for
trol PCB. correct operation.
Remarks