Kyocera Mita KM-2530 Service Manual page 604

3DB
Initialization procedure after installation of facsimile system
1. Insert the machine power plug to the wall outlet and turn the main
switch on.
2. Run maintenance item U601.
3. Enter a destination code using the numeric keys (refer to the
destination code list) and then press the start key.
* Enter a destination code with three digits.
Code Destination
000 Japan
009 Australia
080 Hong Kong
084 Indonesia
088 Israel
108 Malaysia
126 New Zealand
136 Peru
137 Philippines
152 Middle East
156 Singapore
4. Enter the OEM code (000) and then press the start key.
5. Confirm that the display is changed as shown in the illustration.
* At the position of @, the version number of the software is
displayed.
6. Press the cursor key to change the display to maintenance item
U602.
7. Press the start key and confirm that the display is changed as
shown in the illustration.
* At the position of @, the version number of the software is
displayed.
8. After completing the installation, run a communications test to
confirm that the fax system is working correctly.
1-2-8
Code Destination
159 South Africa
169 Thailand
181 U.S.A.
242 South America
243 Saudi Arabia
253 CTR21 (European nations)
Italy
Germany
Spain
U.K.
Netherlands
Code Destination
253 Sweden
France
Austria
Switzerland
Belgium
Denmark
Finland
Portugal
Ireland
Norway
254 Taiwan
INI. KEEP DATA
COMPLETED XXX 000
INI. KEEP DATA
COMPLETED V@.@@
SELECT THE MAINTENANCE NUMBER.
Initial keep data U601
Figure 1-2-20
INI. SHIP DATA
COMPLETED XXX 000
INI. SHIP DATA
COMPLETED V@.@@
SELECT THE MAINTENANCE NUMBER.
Initial ship data U602
Figure 1-2-21