Scanner Does Not Work After Upgrading Windows - Canon MX360 Seires On-Screen Manual

Scanner Does Not Work After Upgrading Windows

Advanced Guide
> Troubleshooting
Windows
S911
Scanner Does Not Work After Upgrading Windows
Check: Disconnect the USB cable, then uninstall and reinstall the MP
Drivers and MP Navigator EX.
Step 1: Uninstall the MP Drivers.
See "Deleting the Unnecessary MP Drivers
Step 2: Uninstall MP Navigator EX.
1.
From the Start menu, select All Programs > Canon Utilities > MP Navigator EX 4.1 > MP
Navigator EX Uninstall.
Note
In Windows 7 or Windows Vista, a confirmation/warning dialog box may appear when
installing, uninstalling, or starting up software.
This dialog box appears when administrative rights are required to perform a task.
If you are logged on to an administrator account, follow the on-screen instructions.
2.
When a confirmation appears, click Yes.
3.
When uninstallation is complete, click OK.
MP Navigator EX is uninstalled.
Step 3: Reinstall the MP Drivers and MP Navigator EX.
Insert the Setup CD-ROM into the computer's disc drive, then select Custom Install and reinstall the
MP Drivers and MP Navigator EX.
> Problems with Scanning > Scanner Does Not Work After Upgrading
" for details.
Seite 866 von 922 Seiten
Page top