Canon MX360 Seires On-Screen Manual page 204

Using the Digital Face Smoothing Function
Effect levels can be changed using the slider below Digital Face Smoothing.
Click OK.
5.
Skin is enhanced beautifully and the
of the image.
Note
(Compare) to display the images before and after the enhancement side by side so
Click
that you can compare and check the result.
Click Reset Selected Image to undo the enhancement operation.
If you want to apply the enhancement to all the selected images at once, select the Apply to all
images checkbox.
Manual Enhancement
Click Manual, then click Correct/Enhance.
3.
Click Digital Face Smoothing.
4.
Note
Effect levels can be changed using the slider below Digital Face Smoothing.
Move the cursor over the image. The shape of the cursor changes to
Drag to select the area you want to enhance, then click OK that appears over the
5.
image.
Skin in and around the selected area is enhanced beautifully and the
mark appears on the upper left of the image.
Note
You can also drag to rotate the selected area.
(Compare) to display the images before and after the enhancement side by side so
Click
(Correction/Enhancement) mark appears on the upper left
Seite 204 von 922 Seiten
(Cross).
(Correction/Enhancement)