Using The Caller Id Service To Reject Calls - Canon MX360 Seires On-Screen Manual

Using the Caller ID Service to Reject Calls

Advanced Guide Faxing
>
F043
Using the Caller ID Service to Reject Calls
If you subscribe to the Caller ID service, the machine detects the sender's Caller ID. If the sender's ID
does not match the conditions specified in this setting, the machine rejects the phone call or fax
reception from the sender.
Note
This setting may not be supported depending on the country or region of purchase. Contact your
telephone company to confirm whether it provides this service.
Specify the setting following the procedure below.
Make sure that the machine is turned on.
1.
Press the FAX button.
2.
The Fax standby screen is displayed.
Press the Menu button.
3.
The Fax settings screen is displayed.
Use the button to select Security control, then press the
4.
Use the button to select Caller rejection, then press the
5.
Use the button to select Subscribed, then press the
6.
You can now perform settings for Caller rejection.
Use the button to select whether to reject a phone call or fax reception from an
7.
anonymous number, then press the
Use the button to select whether to reject a phone call or fax reception out of
8.
the subscribed service area, then press the
Use the button to select whether to reject a phone call or fax reception from the
9.
specified numbers, then press the
If you select Reject, you can register the fax/telephone number to reject.
When Register rejected no.?, use the
number to reject.
For details on how to register the rejected number, see
Note
Even if you reject the phone call, the machine rings once.
(The machine may not ring depending on the country or region of purchase.)
> Receiving Faxes > Using the Caller ID Service to Reject Calls
OK
button.
OK
button to select Yes, then register the fax/telephone
OK
OK
button.
OK
button.
button.
OK
Registering the Rejected Number
Seite 650 von 922 Seiten
button.
button.
.
Page top