Scan Size; Data Format; Scan Resolution - Canon MX360 Seires On-Screen Manual

Setting Items on the Operation Panel of the Machine
Advanced Guide
> Scanning
the Operation Panel of the Machine
U049
Setting Items on the Operation Panel of the Machine
You can change the scan settings such as the scan size, resolution, or data format.
In Scan mode, press the Settings button repeatedly to switch the item to set. Use the
select the item, then press the
Note
The * (asterisk) on the LCD indicates the current setting.
When Auto scan is selected for Document type to forward the scanned data to the computer, the
scan setting cannot be specified.
Some setting items cannot be specified in combination with other setting items, the document type,
or the destination to save the data.
The settings of the scan size, resolution, and data format are retained even if the machine is turned
off.
When you forward the scanned data to the computer, you can specify the destination and file name
using MP Navigator EX. For details, refer to
If you scan originals from the computer, you can scan with advanced settings. Refer to
for scanning from the computer.
Scanning

Scan size

Select the size of the original on the Platen Glass or in the ADF.
Ex:
If you select Auto to save to the computer, the machine detects the page size automatically and
starts scanning.
If you select Multi to save to the computer, you can scan several originals at a time.
Note
When Legal is selected, load the original in the ADF.
When 4"x6"(10x15cm), 5"x7"(13x18cm), or Auto is selected, load the original on the Platen
Glass.
Some of setting items are not available depending on the country or region of purchase.

Data format

Select the data format of the scanned data.
Ex:

Scan resolution

Select the resolution for scanning.
Ex:
> Scanning with Using the Operation Panel of the Machine
OK button.
Scanner Button Settings Tab (Save to PC)
Seite 379 von 922 Seiten
> Setting Items on
button to
.
Let's Try
Page top