Page 3
Fax to Phone Line Connection Before Hand Set Wall Jack (Phone) (Existing Phone Cord) After Hand Set (Phone) Wall Jack (Existing Phone Cord) (Phone Cord included with Canon printer) Previous Next...
Page 4
Fax to Phone Line Connection • Plug the provided phone cord into the wall jack Hand Set (Phone) Wall Jack (Existing Phone Cord) (Phone Cord included with Canon printer) Previous Next...
Page 5
Fax to Phone Line Connection • Plug the provided phone cord into the “L” jack located on the rear of the multifunction Hand Set (Phone) Wall Jack (Existing Phone Cord) (Phone Cord included with Canon printer) Previous Next...
Page 6
Fax to Phone Line Connection • Remove the white plug (D) from the upper jack. Hand Set (Phone) Wall Jack (Existing Phone Cord) (Phone Cord included with Canon printer) Previous Next...
Page 7
Fax to Phone Line Connection • Plug the second phone cord into the “telephone” jack located on the rear of the multifunction Hand Set (Phone) Wall Jack (Existing Phone Cord) (Phone Cord included with Canon printer) Previous Next...
Page 8
Fax to Phone Line Connection • Plug the second phone cord into the phone Hand Set (Phone) Wall Jack (Existing Phone Cord) (Phone Cord included with Canon printer) Previous Next...
Page 10
Step 1 Step 2 Turn on the MX360 or MX410 by Press the FAX button. pressing the ON button. MX360 MX410 Previous Next...
Page 11
Step 3 Step 4 Press the Menu button Use the Left or Right Arrow button to select “Receive mode set”. Previous Next...
Page 12
Step 5 Step 6 The “Receive mode set” screen will Press the OK button appear Previous Next...
Page 13
Step 7 Step 8 Ensure that “DRPD” is displayed Use the Left or Right arrow button to select “DRPD” Previous Next...
Page 14
Step 9 Step 10 The “Make advanced settings?” Press the OK button screen will appear Previous Next...
Page 15
Step 11 Step 12 Ensure “Yes” is selected Use the Left or Right arrow button to select “Yes” Previous Next...
Page 16
Step 13 Step 14 The “DRPD” screen will appear Press the OK button Previous Next...
Page 17
Step 15 Step 16 Confirm “DRPD: Fax ring pat.” is Use the Left or Right arrow button to select “DRPD: Fax ring pat.” selected Previous Next...
Page 18
Step 17 Step 18 The “DRPD: Fax ring pat.” screen Press the OK button will appear Previous Next...
Page 19
Step 19 Step 20 Use the Left or Right arrow button Once you have selected the to select the ring pattern assigned appropriate ring pattern, press the to your fax number. Your phone OK button service provider assigns this pattern Previous Next...
Page 20
Step 21 Step 22 The “DRPD” screen will reappear Press the FAX button Previous Next...
Step 19 Receiving A Fax The screen will return to the FAX When a person dials your DRPD standby screen and DRPD will be number the MX360 or MX410 will the selected mode. Your MX360 or recognize the distinctive ring MX410 is now set to DRPD mode pattern and will answer the call.