Canon MX360 Seires On-Screen Manual page 780

Fax settings
Telephone line type
Selects the telephone line type setting for the machine.
Preparing for Faxing
Note
This setting may not be available depending on the country or region of purchase.
Advanced FAX settings
Auto redial
Enables/disables automatic redialing.
If you select ON, you can specify the maximum number of redial attempts and the length of
time the machine waits between redial attempts.
Dial tone detect
Avoids mistransmission when reception and transmission occur at the same time.
If you select ON, the machine transmits the fax after confirming the dial tone.
Note
This setting may not be available depending on the country or region of purchase.
Pause time settings
Sets the length of time paused for each press of the Redial/Pause button.
TTI position
Selects the position of the sender information (outside or inside the image area).
Remote RX
Enables/disables remote reception.
If you select ON, you can specify the remote reception ID.
Remote Reception
Color transmission
When faxing color documents using the ADF, selects whether to convert them into black &
white data if the recipient's fax machine does not support color faxing.
If you select If incompatible, end, the machine does not send color documents when the
recipient's fax machine does not support color faxing.
RX image reduction
Enables/disables automatic reduction of incoming faxes so that they fit in the selected paper.
If you select ON, you can select the image reduction direction.
Adv. communication
ECM TX
Selects whether to send faxes in Error Correction Mode (ECM).
Transmission/Reception of Faxes Using ECM
ECM RX
Selects whether to receive faxes in Error Correction Mode (ECM).
Transmission/Reception of Faxes Using ECM
TX start speed
Selects the fax transmission speed.
Ex:
The following settings are available.
33600 bps/14400 bps/9600 bps/4800 bps
The * (asterisk) on the LCD indicates the current setting.
33600 bps is the maximum transmission speed. When the telephone line condition or
connection is poor, selecting a lower transmission speed may solve transmission
problems.
Seite 780 von 922 Seiten