<< Previous Next >> Installing Your Multifunction to Your Network for the First Time PIXMA MX340 Windows OS Preparing to Connect My Multifunction to My Network Network Requirements Important Information You Need Before Adding Your Multifunction Downloading & Installing the Drivers...
Preparing to Connect My Multifunction << Previous Next >> To My Network Network Requirements Before connecting the machine to the network, make sure that configuration of the computer and access point or router is complete, and that the computer is connected to the network. Notes on Network Connection •...
Preparing to Connect My Multifunction << Previous Next >> To My Network An "Ad-hoc connection," which establishes a direct connection to the computer over a wireless connection without using an access point, is not supported. Be sure to prepare an access point. Important Information You Need Before Adding Your Multifunction The following information is required to connect to your access point or router.
Select Consumer & Home Office in the Product Type menu dropdown, All-In-One Printer in the Product Family, PIXMA MX Series in the Product Click here to go to the Canon Canada Support Home Page Series and click on the Drivers & Software link for your model.
Downloading and Installing the Drivers << Previous Next >> Step Three Step Four In the Drivers / Software Selection section, select your In the Drivers section, click the link* (red printing) for the MX operating system in the Select OS dropdown menu. Driver *Name varies by model Step Five...
If the firewall function of your security software is turned on, a warning message may appear that Canon software is attempting to access the network. If such a warning message appears, set the security software to always allow access.
Downloading and Installing the Drivers << Previous Next >> Installing the Driver NOTE: If a User Account Control screen appears, click Continue or Yes (depending on Windows version) to continue. NOTE: If the same screen reappears in subsequent steps, click Continue or Yes. Step Two Step One Click Next on the Welcome screen.
Downloading and Installing the Drivers << Previous Next >> Step Three Step Four Click Yes for the License Agreement. After searching for printers, the Detected Printers List appears. Verify your printer is detected and click Next. If the Please Allow All Install Wizard Processes screen appears, click Next.
Downloading and Installing the Drivers << Previous Next >> Step Six Step Five On the Detected Printers List, select the printer (if more than Turn on the printer then click OK.. one is listed), then click Next.
Downloading and Installing the Drivers << Previous Next >> Step Seven Click Complete on the Setup Completion screen. Wireless setup is now complete.