Scangear (Scanner Driver) Does Not Start - Canon MX360 Seires On-Screen Manual

ScanGear (Scanner Driver) Does Not Start

Advanced Guide
> Troubleshooting
Start
S903
ScanGear (Scanner Driver) Does Not Start
Check 1: Make sure that the MP Drivers is installed.
If it is not installed, insert the Setup CD-ROM into the computer's disc drive, then select Custom Install
and install MP Drivers.
Check 2: On the File menu of the application, select Select Source and
select the machine.
Important
If the machine name is displayed multiple times, select the one that does not include WIA.
Note
The operation may differ depending on the application.
Use the WIA driver when scanning from a WIA-compliant application.
Scanning with WIA Driver
Check 3: Make sure that the application is TWAIN-compliant.
You cannot open ScanGear (scanner driver) from applications not supporting TWAIN.
Check 4: Scan and save the image using MP Navigator EX, then import it
into the application.
You can specify which application to start after scanning, in Application Settings of the Custom dialog box
of MP Navigator EX.
Custom Dialog Box
> Problems with Scanning > ScanGear (Scanner Driver) Does Not
Seite 857 von 922 Seiten
Page top