Setting The Receive Mode - Canon MX360 Seires On-Screen Manual

Setting the Receive Mode

>
Contents Preparing for Faxing
C157
Setting the Receive Mode
There are receive modes available as follows.
TEL priority mode
Fax only mode
DRPD *1 or Network switch
This setting is only available in US and Canada.
*1
*2 This setting may not be available depending on the country or region of purchase.
See
Selecting a Receive Mode
Note
The receiving operation procedure varies depending on the selected receive mode.
For the receiving method depending on each receive mode, see
If you want to use a single telephone line for faxes and voice calls, you need to connect a
telephone or an answering machine to the External Device Jack of this machine.
1.
Select the receive mode.
Press the FAX button, and press the
(1)
Use the (-) or
(2)
menu, and press the
Use the (-) or
(3)
button.
A confirmation screen asking whether to make advanced settings will appear.
Select Yes, then press the
available for that mode.
See Selecting a Receive Mode
The screen will return to the fax standby screen after configuring the advanced settings.
Note
If DRPD is selected, the fax ring pattern can be selected on the DRPD: Fax ring pat. screen.
See Setting the DRPD Ring Pattern (US and Canada only)
Setting the DRPD Ring Pattern (US and Canada only)
If you have subscribed to a Distinctive Ring Pattern Detection (DRPD) service provided by your
telephone company, your telephone company will assign two or more telephone numbers with
distinctive ring patterns to your single telephone line, allowing you to have different numbers for fax
calls and voice calls using only one telephone line. Your machine will automatically monitor the ring
pattern, and will automatically receive the fax if the ring pattern is a fax call.
To use DRPD, follow the procedure below to set the fax ring pattern that matches the pattern
assigned by your telephone company.
Note
Contact your local telephone company for detailed information on this service.
> Setting the Receive Mode
*2
to select the appropriate mode.
Menu
(+) button to select Receive mode set. in the Fax settings
button.
OK
(+) button to select a receive mode, and press the
OK button. Configure the selected receive mode according to the setting options
.
Advanced Guide
.
Receiving Faxes
button.
.
Seite 28 von 922 Seiten
Troubleshooting
OK