Canon MX360 Seires On-Screen Manual page 551

Scanning Multiple Documents from the ADF (Auto Document Feeder) in ...
Advanced Guide
> Scanning
Settings Using ScanGear (Scanner Driver)
Feeder) in Advanced Mode
S209
Scanning Multiple Documents from the ADF (Auto Document
Feeder) in Advanced Mode
Use the Advanced Mode tab to specify the image brightness, color tone, etc. and scan multiple
documents placed on the ADF (Auto Document Feeder) at one time.
When scanning from the ADF, documents are scanned without preview.
Place the documents on the ADF, then start ScanGear (scanner driver).
1.
Placing Documents (ADF (Auto Document Feeder))
Starting ScanGear (Scanner Driver)
Click the Advanced Mode tab and select Document (ADF Simplex) for Select
2.
Source.
Note
Settings are not retained when you switch modes.
Set Input Settings.
3.
Input Settings
Set Output Settings.
4.
Output Settings
Make image corrections and color adjustments as required.
5.
Image Settings
Color Adjustment Buttons
Click Scan.
6.
Starts scanning.
> Scanning with Other Application Software
> Scanning Multiple Documents from the ADF (Auto Document
Seite 551 von 922 Seiten
> Scanning with Advanced