Selecting A Receive Mode - Canon MX360 Seires On-Screen Manual

Setting the Receive Mode
1.
Display the DRPD: Fax ring pat. screen.
Press the FAX button, and press the
(1)
Use the (-) or
(2)
menu, and press the
Use the (-) or
(3)
Use the (-) or
(4)
Make sure that DRPD: Fax ring pat. is selected, and press the
(5)
2.
Select the ring pattern.
Use the (-) or
(1)
company assigned to your fax number.
Select from Normal ring, Double ring, Short-short-long, or Short-long-short.
Press the OK button.
(2)
The Incoming ring screen will appear.
Press the OK button.
(3)
Use the (-) or
(4)
telephone, and press the
The screen will return to the fax standby screen.

Selecting a Receive Mode

You can select a receive mode suitable for your fax use conditions, such as whether you connect a
telephone or answering machine to the machine, whether you use a dedicated line for fax, etc.
Select the receive mode according to the following procedure.
Each mode has the option settings. Specify those settings if necessary.
For details, refer to the on-screen manual:
When receiving voice calls (with a telephone or answering machine
connected to the machine):
When mainly receiving a voice call:
TEL priority mode
When a call incomes, the telephone will ring.
- If the call is a voice call, pick up the handset.
- If the call is a fax, pick up the handset. When the machine starts receiving the fax, hang up the
handset.
Note
Available advanced settings for the TEL priority mode
Manual/auto switch: Sets the machine to receive a fax automatically without the handset
being picked up. RX start time allows you to set the number of seconds until the machine
switches to fax reception. After the machine switches to fax reception, you cannot talk
on the telephone even if you pick up the handset.
User-friendly RX: Sets the machine to receive a fax automatically when you pick up the
handset or when the answering machine answers a call that is a fax. If the machine
unexpectedly switches to fax reception during telephone calls, set this to OFF.
When subscribing to a ring pattern detection service provided by your
telephone company:
DRPD or Network switch
When a call incomes, the telephone will ring.
pattern.
- If the call is a fax, the machine will receive the fax automatically.
Menu
(+) button to select Receive mode set. in the Fax settings
button.
OK
(+) button to select DRPD, and press the
(+) button to select Yes, and press the
(+) button to select the ring pattern that your telephone
(+) button to specify the number of times to ring the
button.
OK
Advanced Guide
*1
The machine detects a fax call by the fax ring
*1
button.
button.
OK
button.
OK
button.
OK
.
*2
Seite 29 von 922 Seiten