Canon MX360 Seires On-Screen Manual page 745

Attaching to and Removing from the Printer
When the Bluetooth unit is properly attached to the printer, the message is displayed on
the LCD.
Removing the Bluetooth Unit from the Printer
Remove the Bluetooth unit from the Direct Print Port of the printer in accordance with the following
procedure.
1.
Remove the Bluetooth unit from the Direct Print Port of the printer.
Important
Make sure that the lamp on the Bluetooth unit is neither lit nor flashing before you
remove the Bluetooth unit.
Important
Store the Bluetooth unit with the cap attached.
Seite 745 von 922 Seiten
Page top