Canon MX360 Seires On-Screen Manual page 194

Using the Auto Photo Fix Function
Make sure that Auto is selected.
3.
Click Auto Photo Fix, then click OK.
4.
The entire photo is corrected automatically and the
the upper left of the image.
Note
(Compare) to display the images before and after the correction side by side so that
Click
you can compare and check the result.
Click Reset Selected Image to undo the correction operation.
If you want to apply the correction to all the selected images at once, select the Apply to all
images checkbox.
Select the Prioritize Exif Info checkbox to apply corrections primarily based on the settings
made at the time of shooting.
Deselect this checkbox to apply corrections based on the image analysis results. It is
recommended that you normally select this setting.
Click Save Selected Image or Save All Corrected Images.
5.
You can save corrected images as new files.
Note
To save only the image you like, click Save Selected Image. To save all images, click Save All
Corrected Images.
Only JPEG/Exif data format is available for corrected images.
Click Exit.
6.
Important
The corrections will be lost if you exit before saving corrected images.
(Correction/Enhancement) mark appears on
Seite 194 von 922 Seiten
Page top