Canon MX360 Seires On-Screen Manual page 806

A Message for Faxing Is Displayed on the LCD
Busy/no signal
Print for Received documents in Auto
print settings, the fax stored in machine's
memory will be printed automatically.
Paper has run out:
Load the paper and press the
A different size of paper from that specified by
Page size is loaded:
Load the same size of paper as that specified
by Page size, then press the
Page size is set to other than A4, Letter, LTR,
or Legal:
Set Page size to A4, Letter, LTR, or Legal.
Changing the Print Settings
Note
Some of page sizes are not available
depending on the country or region of
purchase.
Media type is set to other than Plain paper:
Set Media type to Plain paper.
Changing the Print Settings
You pressed the Stop button to cancel printing
of a fax:
Press the button to resume printing of the
FAX
fax.
Do not print is selected for Received
documents in Auto print settings under Fax
settings:
You can print the faxes stored in machine's
memory from the Memory reference screen
under the Fax settings screen.
Printing a Document in Machine's Memory
Note
To print the received faxes automatically,
select Print for Received documents in Auto
print settings under Fax settings.
Auto print settings
If you did not print the fax stored in machine's
memory (e.g., if you did not resolve the
Stop button), you
problem by pressing the
can delete or print the fax stored in machine's
memory later.
Document Stored in Machine's Memory
The recipient's number you dialed is busy.
Try dialing again after waiting for a moment.
Resending Faxes (Redialing a Busy
Number)
The fax/telephone number dialed is incorrect.
Check the fax/telephone number and dial
again.
The recipient's fax machine did not respond
(after all automatic redialing attempts).
Contact the recipient and have the recipient
check the fax machine. For an overseas call,
add pauses to the registered number.
The recipient is not using a G3 machine.
The machine cannot send or receive
documents to/from a fax machine that is
incompatible with the G3 standard. Contact the
recipient and ask the recipient to check
whether the fax machine is G3 compatible.
The touch tone/rotary pulse setting on the
machine is incorrect.
Set the machine to match the telephone line
Seite 806 von 922 Seiten
OK button.
OK button.