Canon MX360 Seires On-Screen Manual page 201

Using the Face Sharpener Function
Effect levels can be changed using the slider below Face Sharpener.
Click OK.
5.
The face is sharpened and the
image.
Note
(Compare) to display the images before and after the correction side by side so that
Click
you can compare and check the result.
Click Reset Selected Image to undo the correction operation.
If you want to apply the correction to all the selected images at once, select the Apply to all
images checkbox.
Manual Correction
Click Manual, then click Correct/Enhance.
3.
Click Face Sharpener.
4.
Note
Effect levels can be changed using the slider below Face Sharpener.
Move the cursor over the image. The shape of the cursor changes to
Drag to select the area you want to correct, then click OK that appears over the
5.
image.
The facial area in and around the selected area is sharpened and the
Enhancement) mark appears on the upper left of the image.
Note
You can also drag to rotate the selected area.
(Compare) to display the images before and after the correction side by side so that
Click
(Correction/Enhancement) mark appears on the upper left of the
Seite 201 von 922 Seiten
(Cross).
(Correction/