Loading Envelopes - Canon MX360 Seires On-Screen Manual

Table of Contents

Advertisement

Loading Envelopes

>
Loading Paper / Originals
Contents
C074
Loading Envelopes
You can print on European DL and US #10 envelopes.
The address is automatically rotated and printed according to the envelope's direction by specifying with
the printer driver properly.
Important
You can only print on envelopes with the computer.
Do not use the following envelopes. They could jam in the machine or cause the machine to
malfunction.
- Envelopes with an embossed or treated surface
- Envelopes with a double flap (or sticker flaps)
- Envelopes whose gummed flaps are already moistened and adhesive
Note
The message on how to load envelopes will appear when printing on them. This message will not
appear next time if you select the Do not show this message again. check box.
1.
Prepare envelopes.
Press down on all four corners and edges of the envelopes to flatten them.
If the envelopes are curled, hold the opposite corners and gently twist them in the
opposite direction.
If the corner of the envelope flap is folded, flatten it.
Use a pen to press the leading edge in the inserting direction flat and sharpen the
crease.
The figures above show a side view of the leading edge of the envelope.
Important
The envelopes may jam in the machine if they are not flat or the edges are not aligned. Make
sure that no curl or puff exceeds 0.1 inches / 3 mm.
2.
Load envelopes.
Open the Paper Support.
(1)
Do not open the support as an extension.
>
Loading Paper
> Loading Envelopes
Seite 80 von 922 Seiten
Troubleshooting
Advanced Guide

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents