Canon MX360 Seires On-Screen Manual page 642

Advanced Settings of Receive Mode
reception by detecting the fax signal (CNG signal) when you lift the handset of the
telephone or the answering machine answers. When you have an answering machine
connected to the machine, select ON to switch to fax reception automatically after the
answering machine answers.
If you select OFF, the machine does not switch from telephone calling to fax reception
automatically even if the machine detect the fax signal (CNG signal). Select OFF if you want
the machine not to switch automatically during a call.
Note
If you subscribe to Duplex Ringing service in Hong Kong, the number of times the external
device rings specified with Incoming ring in Fax only mode is available in TEL priority mode.
If you want to specify the number of times the external device rings in TEL priority mode,
select Fax only mode for Receive mode set. under Fax settings, specify the number of times
the external device rings with Incoming ring, then switch to TEL priority mode for Receive
mode set..
If you subscribe to Duplex Ringing service in Hong Kong, we recommend that Manual/auto
switch be set to OFF.
Advanced setting in Fax only mode
You can specify the following setting item.
Incoming ring
You can specify the number of times the external device rings when incoming.
Advanced setting in DRPD
You can specify the following setting items.
DRPD: Fax ring pat.
Sets the distinctive ring pattern of a call that the machine assumes is a fax call.
If you subscribe to a DRPD service, set the ring pattern to match the pattern assigned by
your telephone company.
Incoming ring
You can specify the number of times the external device rings when incoming.
Advanced setting in Network switch
You can specify the following setting item.
Incoming ring
You can specify the number of times the external device rings when incoming.
Seite 642 von 922 Seiten
Page top