Print Settings - Canon MX360 Seires On-Screen Manual

Print settings

Advanced Guide
> Changing the Machine Settings
settings
U075
Print settings
Prevent abrasion
Use this setting only if the print surface becomes smudged.
Important
Be sure to set this back to OFF after printing since it may result in lower printing speed or lower
print quality.
Extended copy amt.
Selects the amount of image that extends off the paper when copying in Borderless (full).
Slight cropping may occur at the edges since the copied image is enlarged to fill the whole page.
You can change the width to be cropped from the borders of the original image as needed.
Cropped area will be larger if Amount: Large is selected.
Note
If printouts contain margins even though you are copying in Borderless, specifying Amount:
Large for this setting may help solve the problem.
AutoPhotoFix setting
When ON is selected, you can print photos using the Exif information recorded in the image files.
When you print photos using the Exif information, set the print setting to Default or On on the
PictBridge compliant device. When Default is selected in the print setting on the PictBridge
compliant device, select Auto photo fix for Photo fix in PictBridge settings.
> Changing the Machine Settings on the LCD
Seite 783 von 922 Seiten
> Print
Page top