Canon MX360 Seires On-Screen Manual page 804

An Error Message Is Displayed on the LCD
Document in ADF
Press [OK]
Failed to scan document
Press [OK]
Close the feeder cover
[OK] ->Eject the document
Document too long
Press [OK]
Check page size
Press [OK]
Open the paper output tray
[OK] ->Continue printing
Cover is open
Paper jammed
Clear paper jam and press [OK]
Data error
Press [OK]
resolve the error. After you press the Stop
button to resolve the error, ensure to press
the button in order to print out data
FAX
remained in the machine's memory.
The document is jammed in the ADF. Remove the
document page jammed in the ADF, then press
the OK button. Operate again after resolving the
error.
Document Jams in the ADF
No document in the ADF.
Press the
OK button to resolve the error, then
operate again after loading documents.
Documents remain in the ADF.
Press the button to eject documents and
OK
press the Stop button to stop ejecting.
To continue scanning, operate on the application.
The scanning from the ADF may not be supported
depending on your application software. For
details, refer to the instruction manual of your
application.
The document is too long or is jammed in the
ADF.
Remove the document page jammed in the ADF,
OK button. After resolving the error,
then press the
make sure that the document you are loading
meets the machine's requirements before redoing
the operation.
Document Jams in the ADF
Paper other than A4, Letter, or Legal-sized paper
or 8.5 x 14 inches paper is loaded.
Load A4, Letter, or Legal-sized paper or 8.5 x 14
inches paper.
Open the Paper Output Tray, then press the OK
button.
You opened the Scanning Unit (Cover) during an
operation.
Return the Scanning Unit (Cover) to its original
position.
If paper has jammed in the machine, clear the
jam, reload the paper in the machine correctly and
then press the OK button.
Paper Jams
A power failure has occurred or the power cord
has been unplugged when the faxes are stored in
the machine's memory.
Important
If a power failure occurs or you unplug the
power cord, all faxes stored in the machine's
memory are deleted.
For details on how to unplug the power cord,
see Notice for Unplugging the Power Cord
Press the OK button.
Seite 804 von 922 Seiten
.
Page top