Canon MX360 Seires On-Screen Manual page 51

Making Copies
Load an original on the Platen Glass or in the ADF.
(5)
See
Loading Originals.
To load the original on the Platen Glass, align it with the alignment mark
FACING DOWN as shown below.
Then close the Document Cover gently.
Note
For details on the types and conditions of the original which can be copied, and how to
load the original in the ADF, see
Characters and lines written with a light colored pen or highlight pen may not be copied
properly.
2.
Start copying.
Use the (-) or
(1)
copies (D).
Confirm the page size, media type, and other settings.
(2)
Here we confirm that 100% for Enlarge/Reduce (A), A4 for Page size (B), Plain paper for Media type (E),
and Std (Standard) for Image quality (C) are specified.
Note
To change or confirm the page size, media type, or other settings, press the
button repeatedly until the desired setting item appears.
See Changing the Settings
To make copies in various layout, press the
menu, and use the
See
Using Various Copy Functions
Press the Color button for color copying, or the Black button for black & white
(3)
copying.
The machine starts copying.
Remove the original on the Platen Glass or the Document Output Slot after copying is completed.
Important
Do not open the Document Cover or move the loaded original until copying is completed.
Note
Press the Stop button to cancel copying.
Loading Originals .
(+) button or the Numeric buttons to specify the number of
.
button to display the Special copy
Menu
(-) or (+) button to select the functions.
.
Seite 51 von 922 Seiten
WITH THE SIDE TO COPY
Settings