Replacing A Fine Cartridge - Canon MX360 Seires On-Screen Manual

Replacing a FINE Cartridge

> Routine Maintenance
Contents
C091
Replacing a FINE Cartridge
When remaining ink cautions or errors occur, the message will appear to inform you of the error.
Refer to "An Error Message Is Displayed on the LCD" in "
Advanced Guide , and take an appropriate action.
Note
For information on the compatible FINE Cartridges, refer to the printed manual: Getting Started .
Replacing Procedure
When you need to replace FINE Cartridges, follow the procedure below.
Important
Handling FINE Cartridges
Do not touch the electrical contacts (A) or print head nozzles (B) on the FINE Cartridge. The
machine may not print properly if you touch it.
If you remove a FINE Cartridge, replace it immediately. Do not leave the machine with FINE
Cartridges removed.
Use new FINE Cartridges for replacement. Installing used FINE Cartridges may cause the nozzles to
clog.
Furthermore, with such cartridges, the machine will not be able to inform you when to replace the
cartridges properly.
Once a FINE Cartridge has been installed, do not remove it from the machine and leave it out in the
open. This will cause the FINE Cartridge to dry out, and the machine may not operate properly when
it is reinstalled. To maintain optimal printing quality, use a FINE Cartridge within six months of first
use.
Note
If a FINE Cartridge runs out of ink, you can print with either Color or Black FINE Cartridge, in
whichever ink remains, only for a while. However the print quality may be reduced compared to
when printing with both cartridges. We recommend to use new FINE Cartridges in order to obtain
optimum qualities.
Even when printing with one ink only, print with leaving the empty FINE Cartridge installed. If either
of the Color FINE Cartridge or Black FINE Cartridge is not installed, an error occurs and the machine
cannot print.
For information on how to configure this setting, refer to the on-screen manual:
Color ink may be consumed even when printing a black-and-white document or when black-and-
white printing is specified.
Both color ink and black ink are also consumed in the standard cleaning and deep cleaning of the
Print Head, which may be necessary to maintain the machine's performance. When ink runs out,
replace the FINE Cartridge immediately with a new one.
For details, see Tips on How to Use Your Machine
1.
Make sure that the power is turned on, and open the Paper Output Tray gently.
2.
Lift the Scanning Unit (Cover), then hold it open with the Scanning Unit Support (C).
The FINE Cartridge Holder moves to the replacement position.
> Replacing a FINE Cartridge
.
Advanced Guide
" of the on-screen manual:
Troubleshooting
Advanced Guide
Seite 107 von 922 Seiten
Troubleshooting
.