Canon MX360 Seires On-Screen Manual page 400

Scanning Multiple Documents at One Time from the ADF (Auto Docume...
Starts scanning.
Note
Click Cancel to cancel the scan.
When a duplex type is selected for Document Type, the Manual Duplex Scanning dialog box opens
after scanning. Continue to scan the back sides of the documents.
When a simplex type is selected for Document Type, the Scan Complete dialog box opens after
scanning. Skip ahead to Step 9.
Follow the on-screen instructions to place the documents.
7.
When Short Edge is Selected for Binding Location in Orientation...
Place the documents without changing the orientation of the output documents.
When Long Edge is Selected for Binding Location in Orientation...
Place the documents after rotating the output documents 180 degrees.
Click OK.
8.
Starts scanning.
Note
Click Cancel to cancel the scan.
When scanning is completed, the Scan Complete dialog box opens. Select Scan or
9.
Exit.
Select Scan to scan the next document, or select Exit to end.
The scanned images appear in the Thumbnail window.
Seite 400 von 922 Seiten