In Other Cases - Canon MX360 Seires On-Screen Manual

Cannot Install the MP Drivers
Click Cancel.
1.
Click Start Over on the Installation Failure screen.
2.
Click Back on the screen that appears next.
3.
Click Exit on the "PIXMA XXX" screen (where "XXX" is your machine's name),
4.
then remove the CD-ROM.
Turn the machine off.
5.
Restart the computer.
6.
Make sure that you have no application software running.
7.
Insert the CD-ROM again, then perform Easy Install to install the MP Drivers.
8.

In other cases:

Follow the procedure described in your setup manual to reinstall the MP Drivers.
If the MP Drivers were not installed correctly, uninstall the MP Drivers, restart your computer, and
then reinstall the MP Drivers.
Deleting the Unnecessary MP Drivers
If you reinstall the MP Drivers, perform Custom Install on the Setup CD-ROM , then select MP Drivers.
Note
If the installer was forced to be terminated due to a Windows error, the system may be in an
unstable condition and you may not be able to install the drivers. Restart your computer before
reinstalling.
Seite 812 von 922 Seiten
Page top