Canon MX360 Seires On-Screen Manual page 13

How to Navigate Menus on the LCD
This section describes the procedure to change settings, taking the procedure to specify 4"x6"(10x15cm)
for Page size in the copy mode as an example.
When printing from a computer, see
Note
To change the settings used when printing from a PictBridge compliant device or wireless
communication device, refer to the on-screen manual:
1.
Display the setting options.
Press the COPY button to switch to the copy mode.
(1)
Press the Settings button repeatedly until Page size appears.
(2)
2.
Change the setting option.
Use the (-) or
(1)
Example: Select 4"x6"(10x15cm) here.
Press the OK button.
(2)
Note
To change the settings other than Page size, press the
desired option appears.
For details on the setting options available by pressing the Settings button
For the settings in the copy mode, see
For the settings in the fax mode, see
You can also adjust the scan contrast and resolution of sending faxes with the FAX Quality
button.
For details, see step 2 in
For details on the settings used for saving scanned data on a computer or a USB flash drive in
the scan mode, refer to the on-screen manual:
Printing from Your Computer
Advanced Guide
(+) button to select a page size.
Settings
Changing the Settings
Preparing for Receiving a Fax
Sending a Fax with the Numeric Buttons
Advanced Guide
.
.
button repeatedly until the
.
.
.
.
Seite 13 von 922 Seiten
Page top