Canon MX360 Seires On-Screen Manual page 374

Saving Scanned Data on the USB Flash Drive Using the Operation Panel ...
scanning and scanned data is saved on the USB flash drive.
When you select PDF or Compact PDF for Data format, the confirmation screen asking
you if you continue scanning is displayed after scanning is complete.
Selecting Yes and pressing the
Load the next document on the Platen Glass and start scanning.
By selecting No and pressing the
saved on the USB flash drive in one PDF file.
When you scan the originals continuously, you can save up to 100 pages of images in
one PDF file.
Remove the original on the Platen Glass or from the Document Output Slot after scanning is
complete.
To remove the USB flash drive after scanning is complete, see
Note
If the USB flash drive becomes full while scanning images is in progress, only the images
already scanned can be saved.
You can save up to 2000 files of scanned data in both PDF and JPEG data format.
The folder and file name of scanned data saved on the USB flash drive is as follows:
Folder name: (file extension: PDF): CANON_SC\DOCUMENT\0001
Folder name: (file extension: JPG): CANON_SC\IMAGE\0001
File name: Running numbers, starting from SCN_0001
File date: The date and time of saving as set in the machine. For information on how to set
the date and time, refer to
Importing the Scanned Data Saved on a USB Flash Drive to the Computer
You can import the scanned data saved on a USB flash drive to the computer. After scanning the
data, connect the USB flash drive to the computer, then import the data.
Inserting the USB Flash Drive
Important
Before inserting the USB flash drive:
You may need an extension cable if the USB flash drive cannot be inserted into the
Direct Print Port of the machine. For details, ask an electronics store.
Depending on the type of USB flash drive, the operation may not be guaranteed.
Some USB flash drives with security settings may not be used.
1.
Insert the USB flash drive into the Direct Print Port.
Make sure that the USB flash drive is correctly oriented before inserting it straightforward into
the Direct Print Port.
Removing the USB Flash Drive
1.
Make sure that the machine is not writing data to the USB flash drive.
Check if the writing operation is complete on the LCD.
Important
button allow you to scan the originals continuously.
OK
button, scanning is complete and the data is
OK
Preparing for Faxing .
Removing the USB Flash Drive
Seite 374 von 922 Seiten
.