Aligning The Print Head Position - Canon MX360 Seires On-Screen Manual

Aligning the Print Head Position

Advanced Guide
> Maintenance
Position
P028
Aligning the Print Head Position
Print head alignment corrects the installation positions of the print head and improves deviated colors
and lines.
This machine supports two head alignment methods: automatic head alignment and manual head
alignment.
To perform automatic head alignment, refer to "Aligning the Print Head" in the manual: Basic Guide and
then execute the function from the operation panel of the machine.
The procedure for performing manual print head alignment is as follows:
Print Head Alignment
Open the printer driver setup window
1.
Click Custom Settings on the Maintenance tab
2.
The Custom Settings dialog box opens.
Switch head alignment to manual
3.
Check the Align heads manually check box.
Apply the settings
4.
Click OK and when the confirmation message appears, click OK.
Click Print Head Alignment on the Maintenance tab
5.
The Start Print Head Alignment dialog box opens.
Load paper in the machine
6.
Load three sheets of A4 size or Letter size plain paper into the rear tray.
Execute head alignment
7.
Make sure that the machine is on and click Align Print Head.
Follow the instruction in the message.
Check the printed pattern
8.
Enter the numbers of the patterns with the least amount of streaks in the associated boxes.
Even if the patterns with the least amount of streaks are clicked in the preview window, their
numbers are automatically entered in the associated boxes.
> Performing Maintenance from a Computer
Seite 733 von 922 Seiten
> Aligning the Print Head