Canon MX360 Seires On-Screen Manual page 548

Scanning in Advanced Mode
Click Preview.
4.
Preview image appears in the Preview area.
Note
If you scan without preview, the show-through reduction function will be active. This function is
useful when scanning magazines. However, when scanning photos, the color tone of the
scanned image may differ from the source due to the show-through reduction function. In that
case, use preview first.
Set Output Settings.
5.
Output Settings
Adjust the cropping frame (scan area), correct image and adjust colors as required.
6.
Adjusting Cropping Frames
Image Settings
Color Adjustment Buttons
Click Scan.
7.
Starts scanning.
Note
Click (Information) to open a dialog box in which you can check the current scan settings
(document type, etc.).
ScanGear's response after scanning can be specified in Status of ScanGear dialog after scanning
on the Scan tab of the Preferences dialog box.
Scan Tab
Related Topic
Advanced Mode Tab
Seite 548 von 922 Seiten
Page top