Canon MX360 Seires On-Screen Manual page 636

Using the Hook Button
Advanced Guide Faxing
>
Button
F039
Using the Hook Button
Follow the procedure below to send faxes using the
Note
You can use the Hook button only when Hook key setting in Security control under Fax settings is
set to Enable.
Security control
Important
It may be possible that faxes will reach unintended recipients due to the misdialing or incorrect
registration of fax/telephone numbers. When you send important documents, it is recommended
that you send them after speaking on the telephone.
For details, see Sending a Fax after Speaking on Telephone
With manual transmission, you cannot use the Platen Glass to load documents. Load the
documents in the ADF.
When loading document on the Platen Glass, send a fax with automatic transmission. For details
on the procedure to send a fax automatically, refer to
Make sure that the machine is turned on.
1.
Press the FAX button.
2.
The Fax standby screen is displayed.
Load documents in the ADF.
3.
Adjust the scan contrast and resolution as necessary.
4.
Note
For details on how to adjust the scan contrast and resolution, refer to
Press the Hook button.
5.
Use the Numeric buttons to dial the recipient's fax/telephone number.
6.
Note
You can also dial using speed dialing or manual redialing.
Sending a Fax Using the Speed Dialing Feature
Resending Faxes (Redialing a Busy Number)
When you hear a high-pitched signal, press the Color button or the Black button.
7.
Press the button for color transmission, or the Black button for black & white transmission.
Color
Important
Color transmission is available only when the recipient's fax machine supports color faxing.
Note
To cancel a fax transmission, press the
progress, press the
If documents remain in the ADF after the Stop button is pressed while scanning is in progress,
Close the feeder cover [OK] -> Eject the document is displayed on the LCD. Press the
button and follow the instructions on the LCD to automatically feed out the remaining
documents.
> Sending Faxes Using the Operation Panel of the Machine
Hook button.
Stop
Stop button, then follow the instructions on the LCD.
.
Faxing .
Faxing
button. To cancel a fax transmission while it is in
Seite 636 von 922 Seiten
> Using the Hook
.
OK