Checking The Ink Status - Canon MX360 Seires On-Screen Manual

Checking the Ink Status

> Routine Maintenance
Contents
C092
Checking the Ink Status
You can check the ink status on the LCD.
Make sure that the machine is turned on, then press the
level will appear on the LCD for a few seconds.
Note
The ink level detector is mounted on the machine to detect the remaining ink level. The machine
considers as ink is full when a new FINE Cartridge is installed, and then starts to detect a remaining
ink level. If you install a used FINE Cartridge, the indicated ink level of it may not be correct. In such
case, refer to the ink level information only as a guide.
When remaining ink cautions or errors occur, the message will appear to inform you of the error.
Refer to "An Error Message Is Displayed on the LCD" in "
Advanced Guide , and take an appropriate action.
Example: (A)
The ink is running low. Prepare a new ink cartridge.
> Replacing a FINE Cartridge > Checking the Ink Status
COPY
Troubleshooting
Troubleshooting
Advanced Guide
, FAX , or SCAN button. The current ink
" of the on-screen manual:
Seite 111 von 922 Seiten
Page top