Operation Panel - Canon MX360 Seires On-Screen Manual

Main Components
installed into the right slot (
(21)
FINE Cartridges (Ink Cartridges)
A replaceable cartridge that is integrated with Print Head and ink tank.
Note
For details on installing the FINE Cartridges, refer to the printed manual: Getting Started .
(22)
Scanning Unit (Cover)
Scans originals. Open it to replace the FINE Cartridges or remove jammed paper inside the machine. When
opening the Scanning Unit (Cover), lift it with the Document Cover closed.
(23) Scanning Unit Support
Holds the Scanning Unit (Cover) while it is open.
Important
The area (A) indicated in the figure below may be splattered with ink. It does not affect the
performance of the machine.
Do not touch the area (A). The machine may not print properly if you touch it.

Operation Panel

(1) ON button (POWER lamp)
Turns the power on or off. Lights or flashes green to indicate the power status. Before turning on the
power, make sure that the Document Cover is closed.
Important
Disconnecting the power plug
When disconnecting the power plug after turning off the power, be sure to confirm that
lamp is not lit. If the power plug is disconnected from the wall outlet before the
the
POWER
lamp is turned off, the machine may become unable to print properly since the
POWER
Print Head is not protected.
If the power plug is disconnected, the date/time settings will be reset and all documents
stored in the machine's memory will be lost. Send or print a necessary document, or save
it on the USB flash drive before disconnecting the power plug.
Note
The machine cannot receive faxes when the power is turned off.
The power cannot be turned off while the machine is sending or receiving a fax, or when
there are unsent faxes in the machine's memory.
).
Seite 7 von 922 Seiten