Aligning The Print Head Position From Your Computer - Canon MG2100 Series On-Screen Manual

Aligning the Print Head Position from Your Computer

>
Home Overview of the Machine
the Print Head Position from Your Computer
P028
Aligning the Print Head Position from Your Computer
Print head alignment corrects the installation positions of the print head and improves deviated colors
and lines.
This machine supports two head alignment methods: automatic head alignment and manual head
alignment.
To perform automatic head alignment, refer to "
from the operation panel of the machine.
The procedure for performing manual print head alignment is as follows:
Print Head Alignment
1.
Open the printer driver setup window
2.
Click Custom Settings on the Maintenance tab
The Custom Settings dialog box opens.
3.
Switch head alignment to manual
Check the Align heads manually check box.
4.
Apply the settings
Click OK and when the confirmation message appears, click OK.
5.
Click Print Head Alignment on the Maintenance tab
The Start Print Head Alignment dialog box opens.
6.
Load paper in the machine
Load three sheets of A4 size or Letter size plain paper into the front tray.
7.
Execute head alignment
Make sure that the machine is on and click Align Print Head.
Follow the instruction in the message.
8.
Check the printed pattern
Enter the numbers of the patterns with the least amount of streaks in the associated boxes.
Even if the patterns with the least amount of streaks are clicked in the preview window, their
numbers are automatically entered in the associated boxes.
This manual downloaded from http://www.manualowl.com
> >
Maintenance Performing Maintenance from a Computer
Aligning the Print Head
> Aligning
" and then execute the function
Page 672 of 731 pages