Euro Simon Security System
Voltage
Requirements
Label Here
- - - -
- - - - -
Figure 11. Connecting and Applying Power
Installing X-10 Modules
¾
Lamp and Appliance Modules
1. Set the unit code dial to a unit number different from all other X-10 modules (between 1 and
8).
2. Set the house code for the installation.
3. Plug the module into a wall outlet.
4. Plug the lamp/appliance into the module.
!
Do not use Lamp Modules on appliances or lamps with 300-watt or larger bulbs
!
Do not put the panel antenna in the wall for installations that require ante
Caution
for external antennas
Universal Module
1. Set the unit code dial to a unit number different from all other X-10 modules (between 1 and
8).
2. Set the house code for the installation.
3. Set the module switches to momentary and relay only.
-
Black
+
B
Red
A
A C
A C
H W I N 2
D C O U T
H W I N 1
12