12. Close the small handle
microprocessor in the socket.
Note: There are two marks on the microprocessor retainer. Ensure that you close the small handle
first and then close the small handle marked with
when you close the small handles.
Figure 86. Securing the microprocessor in the socket
13. Install the new heat sink that comes with the microprocessor option kit. See "Replacing the heat
sink" on page 154.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation, go to "Completing the parts replacement" on page 164.
Replacing the microprocessor
Attention: Do not open your server or attempt any repair before reading and understanding "Safety information"
on page iii and "Guidelines" on page 63.
The heat sink and the microprocessor might be very hot. Turn off the server and wait several minutes
to let the server cool before removing the server cover.
Before you begin, print all the related instructions or ensure that you can view the PDF version on another
computer for reference.
ThinkServer TD350 User Guide and Hardware Maintenance Manual
first and then close the small handle
to lock the retainer and secure the new
. Always follow the correct sequence