5. Locate the RAID 110i upgrade key on the system board. Then, lift the RAID 110i upgrade key straight
up to remove it from the upgrade key connector.
Figure 54. Removing the RAID 110i upgrade key
6. If you are instructed to return the old RAID 110i upgrade key, follow all packaging instructions and use
any packaging materials that are supplied to you for shipping.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the removal procedure, go to "Completing the parts replacement" on page 164. As the
onboard SATA software RAID 5 is not available without the RAID 110i upgrade key, you might need to
reconfigure RAID for your server. See "Configuring RAID" on page 58.
Installing or removing the Lenovo ThinkServer RAID 510i upgrade key
The Lenovo ThinkServer RAID 510i upgrade key is used to be installed onto the Lenovo ThinkServer RAID
510i AnyRAID adapter for providing the adapter with the RAID 5 and RAID 50 capability. You can purchase a
Lenovo ThinkServer RAID 510i upgrade key (hereinafter referred to as the RAID 510i upgrade key) from the
Lenovo Web site at:
ThinkServer TD350 User Guide and Hardware Maintenance Manual