To reduce the risk of electric shock or energy hazards:
• This equipment must be installed by trained service personnel in a restricted-access location, as
defined by your local electrical code and the latest edition of IEC 60950.
• The branch circuit overcurrent protection must be rated in accordance with local electrical code
• Use 1.3 mm
or 16 American Wire Gauge (AWG) copper conductor only, not exceeding 3 meters
• Torque the wiring-terminal screws to 1.4 newton-meters or 12 inch-pounds.
• Provide a readily available, approved and rated disconnect device in the field wiring.
This product contains a Class 1M laser. Do not view directly with optical instruments.
Do not place any object on top of rack-mounted products.
Hazardous moving parts. Keep fingers and other body parts away.
© Copyright Lenovo 2014