Lenovo ThinkServer TD350 70DG User Manual And Hardware Maintenance Manual page 132

6. Pull the handle and carefully slide the easy-swap drive or the dummy tray out of the front of the chassis.
Figure 73. Removing the easy-swap drive or the dummy tray
7. Do one of the following:
• If you are replacing an easy-swap drive, remove the four screws to remove the failing drive from the
drive tray.
Figure 74. Removing the drive from the drive tray
• If you are installing an easy-swap drive, go to the next step.
8. Touch the static-protective package that contains the new easy-swap drive to any unpainted surface on
the outside of the server. Then, take the new easy-swap drive out of the package.
118
ThinkServer TD350 User Guide and Hardware Maintenance Manual