PVR 6000 Series
Professional Integrated Receiver Decoders
3.1.4. Front Panel Initialization
Sequence
To activate the PVR 6000 Front Panel Root Menu perform the following:
1. Power up the PVR 6000. The PVR 6000 initialization phase begins and the
Initializing
Please Wait...
2. When initialization complete, the PVR 6000 displays one of two options:
Click Enter for menu
N
OTE
Blank Service1 and/or Service2 fields at the front panel' root screen, means
service not chosen. In order to select services see section 4.2.5.1
Click Enter for menu
3. Click [Enter] to activate and enter the PVR 6000 Root Menu:
initialization message is displayed.
MPEG-2 I.R.
•
Status OK – Both LEDs are lit green.
Status OK
•
Front-End Warning – The warning LED turns orange (For details see
Appendix D).
Service1:
Service1: TV
TRT INT
___________________________________________
Service1:
___________________________________________
Page 3-9