Harmonic ProView PVR 6000 Series User Manual page 136

User Manual
Operation and Management
4.2.5.4. PID Select
This option is intended for advanced users only and should not be used
normally.
Create a Service only through Configuration Service TV1/TV2 Select.
The PID Select menu allows the operator to directly assign an ES to an output
port directly, without attaching it to a Service. This option can be useful when
the PMT is not available or is defective.
Before assigning the ES to an output, the operator verifies that the new PID
entered is correct.
C
AUTION
U
SING THIS CONTROL MENU DISASSOCIATES THE SELECTED ELEMENTRY STREAM FROM ANY
SERVICE AND MAKE IT A STAND ALONE STREAM WITH NO ATTATCH SYNCHRONIZATION AND NO
.
OTHER ASSOCIATED SIGNAL MAY COUSE VIDEO AND AUDIO ISSUES IF NOT HANDLES CORRECTLY
I H I . C S
T IS HIGHLY RECOMMENDED TO CONSULT ARMONIC NC USTOMER UPPORT BEFORE USING
.
THIS CONTROL MENU
To access the PID Select Menu in the front panel control interface go to
Configuration Service PID Select.
Page 4-66 (Rev. 4.1/ SW v1.60/ December 2006)