FEC
The PVR 6000 IP Front End FEC Implementation complies with ProMPEG
CoP3v2, with the following limitations:
•
•
This menu enables OR disables FEC operation.
1
2
The available options are:
•
•
Page 4-38
Columns support only
Maximum TS bit-rate: 25 Mbps
FEC
ENABLE
DISABLE
ENABLE – enables FEC operation; regenerates missing IP packets using FEC
packets received from the configured UDP port.
DISABLE - disables FEC operation; ignores FEC packets and does not
regenerate missing IP packets.
User Manual
Operation and Management
(Rev. 4.1/ SW v1.60/ December 2006)