Figure 4-30: Unit Serial Screen - Harmonic ProView PVR 6000 Series User Manual

4.2.10.3. Serial Control Port Configuration
The Serial Control Port Menu allows the user setting the serial control port
parameters.
To access the Serial Control Port Menu in the front panel control interface go
to Configuration Unit
The following screen displays the Serial Control Port menu:
HW Interface
1
SW Protocol
2
Baud Rate
3
Address
4
Figure 4-30 shows the corresponding Unit Serial Web management screen.
Figure 4-30:
The following paragraphs detail the Unit Serial Control Port configuration
options.
Page 4-132
Serial Control Port.
Serial Control Port
Unit Serial Screen
User Manual
Operation and Management
1-2-8-2
TERMINAL ECHO
115200 [Baud]
(Rev. 4.1/ SW v1.60/ December 2006)
RS232
FFFF