Harmonic ProView PVR 6000 Series User Manual page 124

PID menu includes the following parameters:
•
•
•
•
•
Page 4-54
Select from Service - This table menu lists all available PIDs on the
received transport-stream. It allows selection of specific PIDs from a service
to be filtered. The select from service table menu consist of the following
parameters:
• NAME – The service name
• ID – The service identification symbol [Hex]
• TYPE Service type options: TV, Radio, TLTX, NVOD, MOSAIC, PAL,
SECAM, MAC, FM, NTSC, and Data.
• MODE – Indicates if the service is encrypted (CAS) or free to air (FTA).
For example:
NAME
PROGRAM1
1
When selecting a Service listed at the Select from Service table menu, a
list of all available PIDs of the selected services is displayed, and the user
can select specific PIDs.
For example:
SELECT ALL
1
REMOVE ALL
2
0100-PMT
3
0101-PCR
4
The selected service's ID is displayed at the title. The first two parameters
of every service list are:
• SELECT ALL – Select all PIDs of the current service.
• REMOVE ALL – Remove all PID's of the current service.
The rest of the list includes available PIDs next to the PID' type.
ADD - This parameter allows the user to manually add PIDs by using the keypad
and enter the PID symbol [Hex]. The available values range is 0000 to 1FFF
[Hex].
Remove - This parameter allows the user to manually remove PIDs from
being filtered by using the keypad and enter the PID symbol [Hex]. The
available values range is 0000 to 1FFF [Hex].
Selected List - This screen displays all selected PIDs, For example: 010A.
Clear All - This parameter allows clearing all selected PIDs-to-filter list. The
available options are:
ID
000A
000A
User Manual
Operation and Management
TYPE MODE
TV FTA
(Rev. 4.1/ SW v1.60/ December 2006)