Harmonic ProView PVR 6000 Series User Manual page 227

PVR 6000 Series
Professional Integrated Receiver Decoders
4.3.4.2. VBI 1 (and VBI 2)
The VBI 1 Menu (and VBI 2 in dual decoder IRD's) display VBI parameters
Status.
To access the VBI 1 Menu in the front panel control interface go to
Status Video Vbi 1.
The following screen displays the VBI 1 menu:
Video
1
E.S
2
E.S Top
3
E.S Bottom
4
The available information is:
•
•
•
•
• Picture Coding Type – displays the types of picture coding that were
found in the decoded service. Available picture coding types are: I-B-P,
I-P, P-B and P Only.
• Bit Rate – Displays the bit rate, in bits/sec, for the incoming video
stream
• VBV Buffer Size – Displays the VBV buffer size
• Decoding Errors – Displays the total number of decoding errors
Vbi (1..2)
Fullness
Fullness
Video Fullness – Fullness level of the buffer containing VBIs derived from
the video stream
E.S Fullness – Fullness of the buffer containing VBIs derived from the
elementary stream
E.S Top Num Lines – Counts the number of E.S VBI lines in a field
E.S Bottom Num Lines – Counts the number of E.S VBI lines in a field
Num Lines
Num Lines
1-3-4-2
020 [%]
012 [%]
05 [Ln]
05 [Ln]
Page 4-157